Electrician PrecisionRichmond Hill electricians (289) 907-0816

Electrical repairs in Richmond Hill

Tripping breakers, dead outlets, flickering lights and switches that feel warm. Our electricians find the cause, fix it properly and test the circuit before we leave.

Testing an outlet with a multimeter

Problems we fix every week

  • A breaker that keeps tripping or won’t reset
  • Outlets or whole rooms with no power
  • Lights that flicker, dim or buzz
  • Warm or discoloured outlets, switches or cover plates
  • A burning or hot-plastic smell near outlets or the panel
  • GFCI outlets that trip constantly or won’t reset
  • Two-prong outlets that need grounding or GFCI protection

If you smell burning, see smoke or a breaker trips the moment you reset it, leave it off. Switch off the breaker for that area, or the main if you’re not sure which one, and call.

Troubleshooting, not guessing

Most electrical problems come down to a loose connection, a failing device or an overloaded circuit, and the fix is simple once the cause is found. Finding it is the skill. We test the circuit with meters, trace it back to the panel and check the connections along the way, so the repair solves the problem instead of moving it somewhere else.

Damaged old receptacle and wiring found during a repair
Damaged old receptacle and wiring found during a repair
Voltage test at an outlet with a digital meter
Voltage test at an outlet with a digital meter

Older homes and aluminum wiring

Some Richmond Hill homes built from the mid-1960s through the 1970s were wired with aluminum branch circuits. The risk is at the connections: at outlets, switches and fixtures they loosen over time and can overheat. We repair them with approved pigtailing methods and can check the rest of the house while we’re there.

What’s included

  • Diagnosis with proper test equipment
  • Repair or replacement of the failed device, connection or breaker
  • A test of the repaired circuit before we leave
  • A plain explanation of what caused it and whether anything else needs attention

Questions about electrical repairs

Why does my breaker keep tripping?

Usually one of three things: too much load on the circuit, a short or ground fault somewhere on it, or a worn-out breaker. Testing tells us which, and the fix is different for each.

Is a flickering light dangerous?

One flickering light is usually the bulb or the fixture. Several lights flickering, especially when appliances start up, can point to a loose connection in the panel or the service and should be looked at soon.

Can you replace two-prong outlets?

Yes. Where there’s no ground wire, the code allows GFCI protection as an option, or we can run a new grounded circuit. We’ll explain which makes sense for the room.

Do you fix outdoor outlets and lights?

Yes, including weatherproof covers, GFCI outlets on decks and patios, and outdoor lighting that’s stopped working.

Need electricians in Richmond Hill?

Call or text with your address and what’s going on. A photo of the panel or the problem helps us show up with the right parts.

(289) 907-0816
CallText